20.6 C

Auckland

CONTRACTOR INFO
CONTRAFED PUBLISHING
OUR MAGAZINES:
- LOCAL GOVERNMENT
- Q&M

Trending now

Moving forward with political change

Cost of uncertainty for civil construction

Emerging leader makes his mark

A contractor bride’s report

Protected: Industry’s most successful small elevating scraper

Easy moving over two decades

Please consult us over your road project…

Can AI write your tender response?

Medicinal cannabis – wake-up for contractors

What it takes to make transformational change

Facebook Twitter Instagram Pinterest Youtube

Feature
- Feature
  Moving forward with political change
  November 24, 2023
  Feature
  A contractor bride’s report
  November 23, 2023
  Feature
  Gorge highway slip repairs prove a long haul
  March 17, 2021
  Feature
  Knowing what is under your feet
  November 10, 2020
  Feature
  Rapid repairs kept highway open
  August 27, 2020
COMMENT
- Contractor
  Moving forward with political change
  November 24, 2023
  Contractor
  Cost of uncertainty for civil construction
  November 23, 2023
  Contractor
  Emerging leader makes his mark
  November 23, 2023
  Contractor
  A contractor bride’s report
  November 23, 2023
  Contractor
  Easy moving over two decades
  November 15, 2023
Profile
- Profile
  Emerging leader makes his mark
  November 23, 2023
  Profile
  Talking with a technical diplomat
  April 26, 2023
  Profile
  Pilot power recognised and awarded
  March 30, 2023
  Profile
  A love of engineering and earthworks
  February 24, 2023
  Profile
  A man of many talents
  August 23, 2022
Classic Machines
- Classic Machines
  Protected: Industry’s most successful small elevating scraper
  November 21, 2023
  Classic Machines
  Protected: The Liebherr R984
  October 7, 2023
  Classic Machines
  Protected: Continuing the Legend – The D342 powered…
  September 5, 2023
  Classic Machines
  Protected: Birth of a legend, the early Caterpillar…
  August 19, 2023
  Classic Machines
  Protected: Schield C-35 Bantam excavator
  July 2, 2023
Project
- Project
  Micro-TBM project
  November 17, 2022
  Project
  Into the wild weather with innovative machines
  January 27, 2022
  Project
  Expressway delays explained
  December 13, 2021
  Project
  Escalated cost and climate policies compromise NZUP
  June 4, 2021
  Project
  Last piece of Auckland’s SCI project finished
  May 24, 2021
Archives
Advertising
SUBSCRIPTIONS
BLOG

Search for:

Search for:

Home

p54

by Vijay NaiduOctober 3, 2017October 17, 2022

Share0

Equipment selection with the use of basic maths – Contractor Mag – Oct 2017 – Featured Image

Subscribe to Contractor Magazine >>

Share0

Social Media

On Pinterest

Search for:

Recent Posts

Moving forward with political change

Contrafed PublishingNovember 24, 2023December 4, 2023

November 24, 2023December 4, 2023

Cost of uncertainty for civil construction

Contrafed PublishingNovember 23, 2023November 30, 2023

November 23, 2023November 30, 2023

Emerging leader makes his mark

Contrafed PublishingNovember 23, 2023November 28, 2023

November 23, 2023November 28, 2023

A contractor bride’s report

Contrafed PublishingNovember 23, 2023December 6, 2023

November 23, 2023December 6, 2023

Protected: Industry’s most successful small elevating scraper

Contrafed PUblishingNovember 21, 2023November 21, 2023

November 21, 2023November 21, 2023

Popular Posts

Emerging leader makes his mark

Contrafed PublishingNovember 23, 2023November 28, 2023

November 23, 2023November 28, 2023

The winner of the 2023 CCNZ Emerging Leader Award is a young project...

A contractor bride’s report

Contrafed PublishingNovember 23, 2023December 6, 2023

Moving forward with political change

Contrafed PublishingNovember 24, 2023December 4, 2023

Protected: Industry’s most successful small elevating scraper

Contrafed PUblishingNovember 21, 2023November 21, 2023

Please consult us over your road project plans

Contrafed PUblishingOctober 30, 2023December 6, 2023

Instagram

Pictures from our archives- this photo accompanied

Pictures from our archives- this photo accompanied the evolution of the single axle scraper article in our June 2018 magazine.⁣
⁣
Caption: Shown dumping topsoil behind a Caterpillar D7, this LaPlant-Choate Model C-41 was the smallest of three different sized single axle scrapers the company offered.⁣
With a capacity of almost four cubic yards, it was an ideal sized tool for small townships that needed to shift a bit of earth.⁣
⁣
⁣
To learn more about the single axle scraper's evolution click bio link⁣
#singleaxle #scrapers ⁣
#classicmachines #contractormagazine #heavymachinery #earthmoving #oldiron #heavyequipment

Pictures from our archives- this photo accompanied

Pictures from our archives- this photo accompanied the evolution of the single axle scraper article in our June 2018 magazine.⁣
⁣
Caption: Heil’s venture into this particular area of the scraper market was the model CR, a 3½ cubic yard machine, shown here in fully dumped configuration. It differed from most of its single axle competitors by being all-cable controlled and is pictured behind an International TD-6. These were not popular scrapers and photos of them are extremely rare.⁣
⁣
To learn more about the single axle scraper's evolution click bio link⁣
#singleaxle #scrapers ⁣
#classicmachines #contractormagazine #heavymachinery #earthmoving #oldiron #heavyequipment

Pictures from our archives- this photo accompanied

Pictures from our archives- this photo accompanied the evolution of the single axle scraper article in our June 2018 magazine.⁣
⁣
Caption: Showing many signs of its Continental Steel & Foundry ancestry, this is a GarWood Model 23, a 2½ cubic yard unit sitting in a second hand dealers yard in the USA. Behind the GarWood is another interesting old tractor, the Allis-Chalmers HD-5 which was probably used to pull it! ⁣
⁣
To learn more about the single axle scraper's evolution click bio link⁣
#singleaxle #scrapers ⁣
#classicmachines #contractormagazine #heavymachinery #earthmoving #oldiron #heavyequipment

Pictures from our archives- this photo accompanied

Pictures from our archives- this photo accompanied the evolution of the single axle scraper article in our June 2018 magazine.⁣
⁣
Caption: Towed behind a Caterpillar Sixty track type tractor, this prehistoric beast is a Schmeiser 1½ cubic yard semi-drag scraper. Schmeiser made several sizes of semi-drag scraper, all of which featured rudimentary hydraulic controls. They were popular in the southwest region of the USA but were never particularly reliable. LeTourneau based his R-5 scraper on a Schmeiser semi-drag.⁣
⁣
To learn more about the single axle scraper's evolution click bio link⁣
#singleaxle #scrapers ⁣
#classicmachines #contractormagazine #heavymachinery #earthmoving #oldiron #heavyequipment

Pictures from our archives- this photo accompanied

Pictures from our archives- this photo accompanied the evolution of the single axle scraper article in our June 2018 magazine.⁣
⁣
Caption: Believe it or not this scraper is over seventy years old and still ready for work! Manufactured by Continental Steel & Foundry in the early 1930s this is a model CS7A which held around four cubic yards. Continental were bought out by GarWood pre-WWII and their designs continued under new paint & decals.⁣
⁣
⁣
To learn more about the single axle scraper's evolution click bio link⁣
#singleaxle #scrapers ⁣
#classicmachines #contractormagazine #heavymachinery #earthmoving #oldiron #heavyequipment

Pictures from our archives- this photo accompanied

Pictures from our archives- this photo accompanied the evolution of the single axle scraper article in our June 2018 magazine.⁣
⁣
Caption: This is the last, and largest of the Ordish scrapers. It was capable of hauling approximately eight cubic yards and is pictured at work in Wellington sometime in the early 1960s. A handsome looking beast and Kiwi ingenuity at its finest! ⁣
⁣
To learn more about the single axle scraper's evolution click bio link⁣
#singleaxle #scrapers ⁣
#classicmachines #contractormagazine #heavymachinery #earthmoving #oldiron #heavyequipment

Follow on Instagram

Categories

2020 Perspectives (1)
Annual Survey (4)
Budget (1)
Classic Machines (184)
Contractor (807)
Covid-19 (22)
Crane Association of New Zealand (1)
Cranes (1)
Feature (56)
John Deere (1)
- the 5010 scraper (1)
Komatsu (1)
Legal (6)
LeTourneau-Westinghouse (1)
Model Collector (7)
National Politics (2)
NZTA (1)
Obituary (2)
Paid Content (1)
PayLine (3)
Policy (2)
Politics (2)
Procurement (1)
Project (107)
Resource Management (1)
Tendering (3)

Our Magazines

Newsletter

Subscribe my Newsletter for new blog posts, tips & new photos. Let's stay updated!

Leave this field empty if you're human:

Menu

Home
About Us
Advertising
Contact Us
Subscriptions

Contrafed Publishing Co. Ltd

The Voice of the Industry – Contrafed Publishing Co. Ltd has been producing magazines for New Zealand’s infrastructure industries for more than 40 years.

@2022 - contractormag.co.nz. All Right Reserved. Designed and Developed by PublicEye Creative

Facebook Twitter Instagram Pinterest Youtube

Feature
COMMENT
Profile
Classic Machines
Project
Archives
Advertising
SUBSCRIPTIONS
BLOG